How to configure Syslog Notifications

Tekron clocks that support Syslog are capable of acting as a Syslog Originator. To ensure the notifications are successfully sent you will need to set up a Syslog subscriber. This is a type of server that is capable of receiving Syslog notifications. 

To configure Syslog: 

1. Navigate to the "Network" Tab 
   
2. Then to the "Notifications" sub-tab 
   
3. Click the "Add" button 
   
4. Depending on the version of the configuration software you are using, you will then need to select which port you are connecting the Syslog subscriber and originator (the clock) through. 
   • This defaults to ADMIN/ETH1 
     
5. You will then need to enter the IP of the subscriber 
   
6. The security name 
   
7. Change the Type to Syslog 
   
8. Then click OK