The following covers the basic assembly of the Tekron timing optimized antenna.
Please note, the images may vary from the final product.
Step 1: Remove all the nuts and washers from the antenna
Figure 1-Disassemble the antenna
Step 2: Firmly place the round mounting bracket against the antenna. Do not use any of the washers or nuts at this stage.
Figure 2-Place the mounting bracket hard against the antenna.
Step 3: Place the washer on the thread barrel of the antenna. Attach the first nut, and then following with the locking nut.
Figure 3-Attach the washer first, followed by the two nuts