Refer to the table below to understand the different UDP ports used for Tekron Clocks.
|
Devices |
Protocol |
Ports used for outgoing packets |
Ports used for incoming packets |
|
All Tekron products |
DHCP (bootp) |
67 |
68 |
|
All Tekron products |
PTP |
319, 320 |
319, 320 |
|
All Tekron products |
NTP |
123 |
123 |
|
All Tekron products |
Configuration (i.e. configuring Tekron clock) |
9997 |
9997 |
|
All Tekron products |
Upgrading Tekron clock firmware |
9997 |
9997 |
|
All Tekron products |
SNMP |
162 |
161 |
|
All Tekron products |
Syslog |
514 |
The clock does not act as Syslog servers so do not receive any Syslog messages. |
|
Tekron legacy product range (TCG-xxE, TTM 01-E) |
Upgrade/Boot loader |
9992, 9999, 9990 (used only on for Firmware earlier then 2.2026) |
9992, 9999, 9990(used only on for Firmware earlier then 2.2026) |
* TFTP is not used in Tekron's current product range.