How to configure IRIG-B in the Config Tool
- Open the Tekron Configuration Tool and Discover your clock
- Log in to the Tekron Configuration Tool
- Navigate to the I/O Tab
- Select the output you wish to configure
- Ensure it is capable of TTL
- Ensure it is capable of TTL
- Under the IRIG-B/Pulse Output Port settings, select the drop down and click IRIG-B
- If you wish the IRIG-B Pulse to be inverted, click the inverted checkbox
- By default DCLS IRIG-B m will be selected, if you wish to switch to AM IRIG-B or Modified Manchester you will need to select your desired modulation
- Once you have clicked the store button, you will be outputting IRIG-B
- If you wish to configure any extensions or other additional features you can do this in the bottom left screen.
- Binary Seconds in Code option, will include the number of binary seconds as part of the transmitted IRIG-B signal
- Use UTC Time, will allow you to switch between outputting local and UTC time
- Extensions, this will allow you to select which if any extensions you will look added to the transmitted IRIG-B signal
- Parity, will allow you to set the parity of the IRIG-B Signal.
Note: To determine which IRIG-B Format is being output you can use this guide here
- Once all settings are configured click the store button and you will be outputting IRIG-B